PRODUCT DETAILS
Name |
film faced plywood |
Core |
Poplar, Birch, Eucalyptus,Combi core
|
MOQ |
1*20ft |
Glue |
MR, E1, E2, Melamine, WBP, Phenolic WBP
|
Size:
|
1220*2440mm,1250*2500mm or as customer required.
|
Face/Back |
black/brown/red film/customized pattern |
Thickness(mm)
|
5-25mm |
Certificated |
CE, ISO, CARB,etc |
Hot press
|
One time hot press,two times hot press,three times hot press
|
Moisture:
|
≤12%
|
Thickness tolerance:
|
± 0.5mm
|
Delivery time
|
Within 15days after received deposit or L/C .
|
Quantity |
20GP 8pallets/25M3
|
40GP 16 pallets/42M3
|
40HQ 18 pallets/53M3;
|
Usages
|
Can be widely used for building concrete, etc
|
Formaldehyde emission |
E0,E1,E2 E1<1.5 mg/L E2<5 mg/L
|
Packing |
Inter packing: plastic bag Outer packing: covered by carton board,then fastened by steel belts with pallets.
|
Shipment |
Container
|
Payment |
T/T 30% deposit,the balance against the copy of B/L
|
Machine |
Local machine and import machine |
The patterm has no influences on reusable times , just beautiful function , Covering some small flaws can also be used for publicity (usually the company's logo, etc.) or design patterns on the product and packaging, which can also facilitate customers to quickly find out their own goods, and customers can better identify them. The color of the font must not match the color of the phenolic inpregnated film paper.
In view of thickness ,price: red film >brown film >black film
film faced plywood can also be applied in conditions of high temperature drop, influence of moisture and detergent cleaning. It is resistant to corrosion attack. Some film faced plywood has edge treatment by Melamine or Phenolic Glues or WBP to ensure the water-and wear-resistance. Its surface is smooth and beautiful, minus the secondary plastering process of the wall, which can directly decorate the surface and shorten the construction period.
Feature:
1. If put in boiling water, it is still glue-sticking and non-deformed.
2. Physical wood can also satisfy the requirements of constructing mould and decoration, which can hardly recover its smoothness even after repairing.
3. Light Weight: High grade eucalyptus and poplar as the basic material, very light, so the film faced plywood is convenient for transporting, and one person could delivery single formwork by hand.
4. Easy To Cut:according to the construction, the formwork could be cut into small size for reusing.
5. Good Physical mood: it is better than iron mould, plywood can solves the problems of leaking and rough surface during constructing process
6. Re-used:it can be reused 12-15 times, thus reducing the cost greatly and avoiding the disadvantages from iron mold.
7.Multi Using: film faced plywood could be used for wall, slab, column, beam and bridge concrete pouring etc..
8. No Deformation: If put in boiling water for 48 hours, it is still glue-sticking and non-deformed, not deformation and chipping .
9. High Quality Film: Our film can protect the formwork surface from the corrosion and makes the formwork durable, improves the flatness of the concrete surface and makes the concrete surface save the second time plastering, so it could save a lot cost of construction.
Attention:
1.Advantage:Non-distortion,High intension and easy application,water-resistant,Anti cracking,Anti acid. etc
2.Usage:It is wodely used for concrete shutter boards,outside door simple houses,outside table and chair and so on.
3.Do concrete:beautiful and slippy surface, take out of the second plaster, which can save 30% working time. well heat preserration, in favor of winter outsiade construction.
Phenolic inpregnated film paper manufacturating process:
Maintenance of plywood formwork
The formwork construction process is made more efficient because of the use of modern formfork technology, which includes the use of phenolic film faced plywood. It is coated on both sides with phenolic film and is suitable for multiple use and smoother surface. The number of times used depend on the followings:
1). Sealing of Edges
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should be sealed as soon as possible with waterproof paint.
2). Sealing of Holes
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
3). Cleaning and Repair
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiff brush. It may be necessary to use a hardwood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete.
4). Storage
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face to face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly
Production Process
Product Application
Company Profile
Linyi Tonghe Trade Co., Ltd, a joint venture plywood manufacture, has advanced production lines and sanding machines that were imported from overseas countries.There are a lot of features such as high-end machines,standard production processes,high-qualified products and first-class services.Owing to them,it reaches the leading level in china.
We located in the rich raw wood material base, which ensures the production process will not be interrupted. The main products can be divided into two main categories:furniture use plywood and construction use plywood(Film Faced Plywood).Model Size of Furniture use plywood is primarily 1220mm*2440mm*(3-35mm).
Both of them comprises of poplar core; birch core; okoume core; mixed core and so on.Glues are phenolic glue ,melamine glue,E1,E1 and other Environment-protected glues. The face and back is okoume,poplar,birch,red oak,maple,
Cherry.It is durable or time-lasting for film faced plywood with good melamine glue or phenolic glue.Our products are mainly exported to Europe; America;Middle East and other regions,certified by ISO,CE,CARB of the United states. We also have independent international export rights.
We are happy and pleasured to be your friends. If you are interested in our products, please contact us.
Packing
Formaldehyde emission |
E0,E1,E2 E1<1.5 mg/L E2<5 mg/L
|
Packing |
Inter packing: plastic bag Outer packing: covered by carton board,then fastened by steel belts with pallets.
pallet +plastic |
Shipment |
Container
|
Payment |
T/T 30% deposit,the balance against the copy of B/L
|
FAQ
Q1: How can I get the sample to check your quality?
A1: After price confirmation, if you just need a sample to check the quality, we can provide you sample for free on the condition that you can afford the express freight.
Q2: What is your term of delivery?
A2: We accept FOB Qingdao, CIF, CNF and etc.
Q3 : What's the application of your products?
A3: Our products can be applied in various industries such as construction, furniture, decoration and packing.
Q4: Do you have MOQ request?
A4: Our minimum order quanity is usually 40 HQ container. Smaller quantity is also OK.
30 production lines,1000-1500workers
Price advantage: 2% lower than others' based on the same quality.
Workers check each board more than three times
OUR PROMISE
If you encounter any problems during the usage of the product, we will provide you with satisfactory solutions in time.