Construction Shuttering Board Phenolic Plywoods Black Finger Joint Recycled Concrete Formwork Film Faced Plywood

Product Description

Reusable water-proof film-faced plywood formwork

 

QUALITY CONTROL OF AJ plywood formwork

we have persistent pre-shipping inspection system.The inspection process starts immediately after order is confirmed.The grade and type of raw material,processing methods and significant points will be advised to the factory management.Our long years experienced inspectors team will check each order during production process and befor shipping.An inspection report in uniform format will then be provided to our customers.Based only on the inspection report a decision in rendered whether shipment is allowed or will need further re-processing and inspection.

SPECIFICATIONS  OF AJ plywood formwork

Film Type: Brown and black film in glossy, matt, and mesh finish

Core Species:  Poplar, Eucalyptus

Size:1220x2440mm(4'x8'), 1250x2500mm, 915x2135mm(3'x7'), 1525x3050mm(5'x 10')

Thickness:6.0mm-27mm

Glue: WBP phenolic, WBP, MR

 

Descriptions	No. of Layers	Frequency
Brown film, Hardwood and Birch core, WBP phenolic glue	13+2	20
Brown film, Combi core, WBP phenolic glue	13+2	15
Brown film, Combi core, WBP glue	13+2	10
Black film, Combi core, WBP glue	13+2	8
Brown film, Poplar core, MR glue	13+2/11+2	5
Black film, Poplar core, MR glue	13+2/11+2	5

ABOUT US

Our Plywood factory is one of the most famous plywood factories in China. Our factory was built in 2000, we have 6 manufacturing plants, one glue workshop and one independent laboratory. To support steady production, we have developed a poplar logs base sized about 100 hektares, our annual production capacity is around 80,000M3

 

Maintenance of  plywood formwork

The formwork construction process is made more efficient because of the use of modern formfork technology, which includes the use of phenolic film faced plywood. It is coated on both sides with phenolic film and is suitable for multiple use and smoother surface. The number of times used depend on the followings: 
1). Sealing of Edges
Phenolic fabric film faced plywood edges are fully sealed at the factory and it is most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should be sealed as soon as possible with waterproof paint.

2). Sealing of Holes
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.

3). Cleaning and Repair
To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiff brush. It may be necessary to use a hardwood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete.

4). Storage
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face to face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly

 

Linyi Tonghe trade Co.,Ltd is a joint venture plywood manufacture.It located in wood  base, Linyi. It covers an area of 1000000 square meters, has  1000 employers, the annnaul output is  60000cubic meters .Our company has the advanced production lines,and the sanding machines were imported from Japan,Using the advanced standard production processes,our productionreach the leading level in china.

managed products: film faced plywood, marine plywood, furiture plywood , F17 formwork plywood 
price advantage: 2% lower than others' based on the same quality 
Material : pine poplar birch eucalyptus , etc 
film paper : red black brown customized logo 
QC team: check each board piece by piece 
Q1: Is your company a factory  or a trader?
A: Our company owns a industrial park including 3 factories and has more than 15 years  of production experience.
Q2: Can I get some samples?
A: Yes, our samples are free of charge but the customer needs to pay express cost.
Q3: Do you receive customized order?
A: Yes, ODM &OEM are welcomed.
Q4: What's the lead time?
A: According to the order quantity, orders below200 cubic meters will be shipped within 15 days, big order need negotiation.
Q5: What's your warranty terms?
A:Returnable if the product has quality problem.
Q6: What's your payment terms?
A: We receive T/T or L/C at sight.